VCM II Diagnostic Tool For Ford Mazda Install & Setup Guide !

VCM 2 VCM II IDS is a 2in1 OBDII Diagnostic Tool For both Ford V101 and Mazda V94 and VCM 2 has been tested and provded by many users with a good reputation for its quality,performance as well as price. By far, VCM II Diagnostic Tool was regarded as the best and costive scanner tool for ford and mazda cars.

And today,this article will share a VCM 2 VCM II IDS 2 in 1 For Ford Mazda Install & Setup Guide step by steps,maybe it will be useful for newbies or beginners who are first time to use VCM II.So,let's start now !

For Ford VCM 2 Installation Guide

1. Turn the computer time to January 1,2016.

2. Open IDS-91.01-FULL,start to install V91 first,choose the language you want.Accept all,and press next.Install and save it in C disk,don’t change the save route. And the software need about 4GB space to install.Usually it will take 30mins-1hour to Update database.

3 Open the IDS logo in your desk now,put information(ignore),then it ask for your computer time is not right.(if you have change to 2016.1.1,then ignore it here)Then it tell you only have 3 days,need activated it.(Ignore it now,press next)

4.Open the CD disk folde, Install V101.01_FULL, then install V101.02, and then install V101.03, then running IDS_V101.03, you can also got 3 days trial.

5. Activated the license,copy your key from DFstd-key.Then ready to install the Deep Freeze,this software will come out automatic.

6. When 3 days trial used, Adjust the computer time to the date of installation(1/1 2016) will get another 3 days.

For Mazda V94 User Manual

VCM2 chip board is for IDS software V101, if you want to work with for mazda v94, need downgrade the firmware first.And following is a step by steps downgrade guide

1.After opening the software,insert the device’s USB interface.

2.After waitting for the program to connect to the VCM2 device,the eject is shown in figure,select X.

3.In the second pop-up dialog box,select the hook number.

4.Disconnect all the connecting device, unplug the black glue sleeve from the USB port,and then select the hook number.

5.To find the small buttons next to the SD card slot,press the button,and then insert the USB, waitting for the device buzzer sound,release the press button,select hook number.